Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled diesel engine - 24.8 hp (18.5 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable
Weight - Approx. 1,862 kg

Warranty - 2-year limited warranty

ENGINE
3-cylinder
Liquid cooled
Brake hp rating - 28 hp at 2725 rpm


FUEL SYSTEM
Diesel fuel
43ltr fuel tank capacity
Replaceable fuel filter with water separator
Fuel gauge

ENGINE LUBRICATION
3.9 quart capacity
Spin on oil filter
Oil pressure warning light

ENGINE COOLING SYSTEM
Rear mounted, 8 fins/inch, 3 rows
Temperature gauge, indicator light, and over temp protection circuit
6.6 quart coolant capacity

HYDRAULIC COOLING SYSTEM
Double pass 6 row oil cooler
Tip out and removable for easy cleaning
13.2ltr coolant capacity

ELECTRICAL
12 volt electrical system
12 volt heavy duty battery
540 cold cranking amps
40 amp alternator
Console mounted key switch and controls

DRIVE SYSTEM
Two wheel drive: independent high-torque, low-speed wheel motors with 310cc displacement
Integrated transmission with two independent closed-loop hydrostatic circuits
One pump / motor controlling left side forward, neutral, and reverse
One pump / motor controlling right side forward, neutral, and reverse
Pumps are variable displacement piston type with slippers and full stroke capacity of 18cc/rev
Hydraulically actuated wet multi-disc clutch is part of integrated transmission
Transmission directly mounted to engine via bell housing
0-20.1kmh mow/transport speed, infinitely variable
0-13.6kmh reverse speed, infinitely variable

BRAKES
Service Brake: twin levers with dynamic braking through hydrostatic transmission
Parking Brake: Hand actuated brake lever located right of operator with two 10.25” diameter disc brakes mounted on the rear wheel motors

TIRES
High flotation turf tread tires
Front Caster – 4-ply ribbed tread, tubeless 15 x 6-6 20-22 psi
Drive – 24 x12-12 6-ply pneumatic tubeless, demountable and interchangeable Tread “Toro Tuff Trac”

FRAME
High strength steel frame components
Welded construction

CONTROLS
Adjustable twin steering sticks with high performance KYB hydraulic dampers
Rev/N/Forward, located on sides of operator
Right side control console featuring:
Key switch
Throttle
PTO engagement
Remote Hydraulics Selector Switch (optional)
Hydraulic deck lift with load holding check valves and gravity lower; located on right of operator
Parking Brake: Hand actuated brake lever
Rear Hydraulic Lift (optional): Raise/Hold/Lower/Float. Electric switch right side of operator

GAUGES
Hour meter
Fuel gauge

WARNING LIGHTS
High engine coolant temperature
Low engine oil pressure
Glow plug
Low battery voltage

OPERATOR SEAT
High back 2-piece cushion seat with drain hole
Deluxe low profile suspension
Adjustable for operator weight, seat back angle, seat fore/aft position, lumbar support and armrest height
Retractable seat belt
Built-in cup holder and personal storage reached from seat

SAFETY INTERLOCK SYSTEM
Tractor neutral
Operator presence (Engine shuts down if operator is not in seat and traction sticks are moved to the operation position.)
Parking brake
PTO on
Auxiliary hydraulics on
High temp (PTO shuts down but engine still running)
Over temp (engine shuts down)

GENERAL
ROPS: Two-post foldable, certified per OSHA 1928.52 specification.
Curb climbing: Capable of climbing 8” curbs
Tie Downs: Four loops, one located on each corner of the machine.

CUTTING DECKS

HEIGHT OF CUT:
1” - 6” adjustable in 1/4” increments
Change the HOC from 1 to 6 inches in ¼" increments. by raising the deck hydraulically and putting the pin in the corresponding easy-to-see HOC hole.

SIDE DISCHARGE DECK CONSTRUCTION:
7-gauge welded steel deck
5.5” deep
Grass discharged on the right side.
Patented 5/16” thick rubber discharge chute cover to limit the throw distance of clippings.
Width of Cut: 72”
Blade tip speed: 18,000 1,000 ft. /min.
Anti-scalp rollers around deck perimeter

GUARDIAN RECYCLER DECK CONSTRUCTION:
7-gauge welded steel deck
4.25” deep
Vertical discharge system equipped with special baffles which prevent throwing of objects out from the deck.
Width of Cut: 62” or 72”
Blade tip speed: 16,000 1,000 ft. /min
Anti-scalp rollers around deck perimeter

CUTTER DRIVE:
Splined PTO drives gearbox transferring power to three separate spindles via two separate belts.
All spindles have 1.25” diameter shafts mounted in 9” conical housing with dual greaseable tapered roller bearings.

BLADES:
Three, 1/4” thick, 2.5” wide, heat-treated steel blades.

DECK SUSPENSION:
Rigid front frame which supports deck via 4 vertically suspended chains.
Front drag links provide Fore/aft and left/right stability.
Weight transfer system consisting of two torsion springs counterbalances some cutting deck weight.

BELT IDLER:
Spring loaded (torsion) idler.

DECK SIDE SKID:
Replaceable, bolt-on, non-marking polymeric skid
On both sides for Guardian¨ Recycler deck
On left side on Side Discharge deck

ANTI-SCALP CUPS: One located on each blade spindle

MACHINE DIMENSIONS
Height, ROPS up – 72 in.
Overall length – 72 in.
Overall width – 78” (72” Guardian Recycler)
68” (62” Guardian Recycler)
75” (72” Side Discharge)

POLAR TRAC SYSTEM

GENERAL:
POLAR TRAC system converts the Groundsmaster 7200 into a snow removal machine complete with two rubber tracks and a climate control cab in less than four hours by two people.

TRACTION DRIVE
Three wheels per side with rear wheel mounted in place of mower traction wheel.
Front two wheels are mounted to a walking axle that permits motion without losing track tension.
Track tread is made of Kevlar reinforced rubber compound 0-8 mph mow/transport speed, infinitely variable

HYDRAULIC LIFT
Two foot pedals located on center of Polar Trac floor board
Left pedal: Raise/Lower/Hold/Float
Right pedal: Attachment angle control–right/left

ATTACHMENT SYSTEM
Quick-connect A-mount on a hydraulically powered lift arm.
Quick connect PTO coupler and hydraulic connectors

CUTTING DECK SPECIFIC ACCESSORIES FOR 72” SIDE DISCHARGE DECK
Striping Kit
Leaf Mulching Kit
Medium Flow Blade (Standard)
High Flow Blade
Atomic Mulching Blade
Blade and Belt Kit

WARRANTY
2-year or 1500 hour factory warranty

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled diesel engine - 24.8 hp (18.5 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable
Weight - Approx. 1,862 kg

Warranty - 2-year limited warranty

ENGINE
3-cylinder
Liquid cooled
Brake hp rating - 28 hp at 2725 rpm


FUEL SYSTEM
Diesel fuel
43ltr fuel tank capacity
Replaceable fuel filter with water separator
Fuel gauge

ENGINE LUBRICATION
3.9 quart capacity
Spin on oil filter
Oil pressure warning light

ENGINE COOLING SYSTEM
Rear mounted, 8 fins/inch, 3 rows
Temperature gauge, indicator light, and over temp protection circuit
6.6 quart coolant capacity

HYDRAULIC COOLING SYSTEM
Double pass 6 row oil cooler
Tip out and removable for easy cleaning
13.2ltr coolant capacity

ELECTRICAL
12 volt electrical system
12 volt heavy duty battery
540 cold cranking amps
40 amp alternator
Console mounted key switch and controls

DRIVE SYSTEM
Two wheel drive: independent high-torque, low-speed wheel motors with 310cc displacement
Integrated transmission with two independent closed-loop hydrostatic circuits
One pump / motor controlling left side forward, neutral, and reverse
One pump / motor controlling right side forward, neutral, and reverse
Pumps are variable displacement piston type with slippers and full stroke capacity of 18cc/rev
Hydraulically actuated wet multi-disc clutch is part of integrated transmission
Transmission directly mounted to engine via bell housing
0-20.1kmh mow/transport speed, infinitely variable
0-13.6kmh reverse speed, infinitely variable

BRAKES
Service Brake: twin levers with dynamic braking through hydrostatic transmission
Parking Brake: Hand actuated brake lever located right of operator with two 10.25” diameter disc brakes mounted on the rear wheel motors

TIRES
High flotation turf tread tires
Front Caster – 4-ply ribbed tread, tubeless 15 x 6-6 20-22 psi
Drive – 24 x12-12 6-ply pneumatic tubeless, demountable and interchangeable Tread “Toro Tuff Trac”

FRAME
High strength steel frame components
Welded construction

CONTROLS
Adjustable twin steering sticks with high performance KYB hydraulic dampers
Rev/N/Forward, located on sides of operator
Right side control console featuring:
Key switch
Throttle
PTO engagement
Remote Hydraulics Selector Switch (optional)
Hydraulic deck lift with load holding check valves and gravity lower; located on right of operator
Parking Brake: Hand actuated brake lever
Rear Hydraulic Lift (optional): Raise/Hold/Lower/Float. Electric switch right side of operator

GAUGES
Hour meter
Fuel gauge

WARNING LIGHTS
High engine coolant temperature
Low engine oil pressure
Glow plug
Low battery voltage

OPERATOR SEAT
High back 2-piece cushion seat with drain hole
Deluxe low profile suspension
Adjustable for operator weight, seat back angle, seat fore/aft position, lumbar support and armrest height
Retractable seat belt
Built-in cup holder and personal storage reached from seat

SAFETY INTERLOCK SYSTEM
Tractor neutral
Operator presence (Engine shuts down if operator is not in seat and traction sticks are moved to the operation position.)
Parking brake
PTO on
Auxiliary hydraulics on
High temp (PTO shuts down but engine still running)
Over temp (engine shuts down)

GENERAL
ROPS: Two-post foldable, certified per OSHA 1928.52 specification.
Curb climbing: Capable of climbing 8” curbs
Tie Downs: Four loops, one located on each corner of the machine.

CUTTING DECKS

HEIGHT OF CUT:
1” - 6” adjustable in 1/4” increments
Change the HOC from 1 to 6 inches in ¼" increments. by raising the deck hydraulically and putting the pin in the corresponding easy-to-see HOC hole.

SIDE DISCHARGE DECK CONSTRUCTION:
7-gauge welded steel deck
5.5” deep
Grass discharged on the right side.
Patented 5/16” thick rubber discharge chute cover to limit the throw distance of clippings.
Width of Cut: 72”
Blade tip speed: 18,000 1,000 ft. /min.
Anti-scalp rollers around deck perimeter

GUARDIAN RECYCLER DECK CONSTRUCTION:
7-gauge welded steel deck
4.25” deep
Vertical discharge system equipped with special baffles which prevent throwing of objects out from the deck.
Width of Cut: 62” or 72”
Blade tip speed: 16,000 1,000 ft. /min
Anti-scalp rollers around deck perimeter

CUTTER DRIVE:
Splined PTO drives gearbox transferring power to three separate spindles via two separate belts.
All spindles have 1.25” diameter shafts mounted in 9” conical housing with dual greaseable tapered roller bearings.

BLADES:
Three, 1/4” thick, 2.5” wide, heat-treated steel blades.

DECK SUSPENSION:
Rigid front frame which supports deck via 4 vertically suspended chains.
Front drag links provide Fore/aft and left/right stability.
Weight transfer system consisting of two torsion springs counterbalances some cutting deck weight.

BELT IDLER:
Spring loaded (torsion) idler.

DECK SIDE SKID:
Replaceable, bolt-on, non-marking polymeric skid
On both sides for Guardian¨ Recycler deck
On left side on Side Discharge deck

ANTI-SCALP CUPS: One located on each blade spindle

MACHINE DIMENSIONS
Height, ROPS up – 72 in.
Overall length – 72 in.
Overall width – 78” (72” Guardian Recycler)
68” (62” Guardian Recycler)
75” (72” Side Discharge)

POLAR TRAC SYSTEM

GENERAL:
POLAR TRAC system converts the Groundsmaster 7200 into a snow removal machine complete with two rubber tracks and a climate control cab in less than four hours by two people.

TRACTION DRIVE
Three wheels per side with rear wheel mounted in place of mower traction wheel.
Front two wheels are mounted to a walking axle that permits motion without losing track tension.
Track tread is made of Kevlar reinforced rubber compound 0-8 mph mow/transport speed, infinitely variable

HYDRAULIC LIFT
Two foot pedals located on center of Polar Trac floor board
Left pedal: Raise/Lower/Hold/Float
Right pedal: Attachment angle control–right/left

ATTACHMENT SYSTEM
Quick-connect A-mount on a hydraulically powered lift arm.
Quick connect PTO coupler and hydraulic connectors

CUTTING DECK SPECIFIC ACCESSORIES FOR 72” SIDE DISCHARGE DECK
Striping Kit
Leaf Mulching Kit
Medium Flow Blade (Standard)
High Flow Blade
Atomic Mulching Blade
Blade and Belt Kit

WARRANTY
2-year or 1500 hour factory warranty

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled diesel engine - 24.8 hp (18.5 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable
Weight - Approx. 1,862 kg

Warranty - 2-year limited warranty

ENGINE
3-cylinder
Liquid cooled
Brake hp rating - 28 hp at 2725 rpm


FUEL SYSTEM
Diesel fuel
43ltr fuel tank capacity
Replaceable fuel filter with water separator
Fuel gauge

ENGINE LUBRICATION
3.9 quart capacity
Spin on oil filter
Oil pressure warning light

ENGINE COOLING SYSTEM
Rear mounted, 8 fins/inch, 3 rows
Temperature gauge, indicator light, and over temp protection circuit
6.6 quart coolant capacity

HYDRAULIC COOLING SYSTEM
Double pass 6 row oil cooler
Tip out and removable for easy cleaning
13.2ltr coolant capacity

ELECTRICAL
12 volt electrical system
12 volt heavy duty battery
540 cold cranking amps
40 amp alternator
Console mounted key switch and controls

DRIVE SYSTEM
Two wheel drive: independent high-torque, low-speed wheel motors with 310cc displacement
Integrated transmission with two independent closed-loop hydrostatic circuits
One pump / motor controlling left side forward, neutral, and reverse
One pump / motor controlling right side forward, neutral, and reverse
Pumps are variable displacement piston type with slippers and full stroke capacity of 18cc/rev
Hydraulically actuated wet multi-disc clutch is part of integrated transmission
Transmission directly mounted to engine via bell housing
0-20.1kmh mow/transport speed, infinitely variable
0-13.6kmh reverse speed, infinitely variable

BRAKES
Service Brake: twin levers with dynamic braking through hydrostatic transmission
Parking Brake: Hand actuated brake lever located right of operator with two 10.25” diameter disc brakes mounted on the rear wheel motors

TIRES
High flotation turf tread tires
Front Caster – 4-ply ribbed tread, tubeless 15 x 6-6 20-22 psi
Drive – 24 x12-12 6-ply pneumatic tubeless, demountable and interchangeable Tread “Toro Tuff Trac”

FRAME
High strength steel frame components
Welded construction

CONTROLS
Adjustable twin steering sticks with high performance KYB hydraulic dampers
Rev/N/Forward, located on sides of operator
Right side control console featuring:
Key switch
Throttle
PTO engagement
Remote Hydraulics Selector Switch (optional)
Hydraulic deck lift with load holding check valves and gravity lower; located on right of operator
Parking Brake: Hand actuated brake lever
Rear Hydraulic Lift (optional): Raise/Hold/Lower/Float. Electric switch right side of operator

GAUGES
Hour meter
Fuel gauge

WARNING LIGHTS
High engine coolant temperature
Low engine oil pressure
Glow plug
Low battery voltage

OPERATOR SEAT
High back 2-piece cushion seat with drain hole
Deluxe low profile suspension
Adjustable for operator weight, seat back angle, seat fore/aft position, lumbar support and armrest height
Retractable seat belt
Built-in cup holder and personal storage reached from seat

SAFETY INTERLOCK SYSTEM
Tractor neutral
Operator presence (Engine shuts down if operator is not in seat and traction sticks are moved to the operation position.)
Parking brake
PTO on
Auxiliary hydraulics on
High temp (PTO shuts down but engine still running)
Over temp (engine shuts down)

GENERAL
ROPS: Two-post foldable, certified per OSHA 1928.52 specification.
Curb climbing: Capable of climbing 8” curbs
Tie Downs: Four loops, one located on each corner of the machine.

CUTTING DECKS

HEIGHT OF CUT:
1” - 6” adjustable in 1/4” increments
Change the HOC from 1 to 6 inches in ¼" increments. by raising the deck hydraulically and putting the pin in the corresponding easy-to-see HOC hole.

SIDE DISCHARGE DECK CONSTRUCTION:
7-gauge welded steel deck
5.5” deep
Grass discharged on the right side.
Patented 5/16” thick rubber discharge chute cover to limit the throw distance of clippings.
Width of Cut: 72”
Blade tip speed: 18,000 1,000 ft. /min.
Anti-scalp rollers around deck perimeter

GUARDIAN RECYCLER DECK CONSTRUCTION:
7-gauge welded steel deck
4.25” deep
Vertical discharge system equipped with special baffles which prevent throwing of objects out from the deck.
Width of Cut: 62” or 72”
Blade tip speed: 16,000 1,000 ft. /min
Anti-scalp rollers around deck perimeter

CUTTER DRIVE:
Splined PTO drives gearbox transferring power to three separate spindles via two separate belts.
All spindles have 1.25” diameter shafts mounted in 9” conical housing with dual greaseable tapered roller bearings.

BLADES:
Three, 1/4” thick, 2.5” wide, heat-treated steel blades.

DECK SUSPENSION:
Rigid front frame which supports deck via 4 vertically suspended chains.
Front drag links provide Fore/aft and left/right stability.
Weight transfer system consisting of two torsion springs counterbalances some cutting deck weight.

BELT IDLER:
Spring loaded (torsion) idler.

DECK SIDE SKID:
Replaceable, bolt-on, non-marking polymeric skid
On both sides for Guardian¨ Recycler deck
On left side on Side Discharge deck

ANTI-SCALP CUPS: One located on each blade spindle

MACHINE DIMENSIONS
Height, ROPS up – 72 in.
Overall length – 72 in.
Overall width – 78” (72” Guardian Recycler)
68” (62” Guardian Recycler)
75” (72” Side Discharge)

POLAR TRAC SYSTEM

GENERAL:
POLAR TRAC system converts the Groundsmaster 7200 into a snow removal machine complete with two rubber tracks and a climate control cab in less than four hours by two people.

TRACTION DRIVE
Three wheels per side with rear wheel mounted in place of mower traction wheel.
Front two wheels are mounted to a walking axle that permits motion without losing track tension.
Track tread is made of Kevlar reinforced rubber compound 0-8 mph mow/transport speed, infinitely variable

HYDRAULIC LIFT
Two foot pedals located on center of Polar Trac floor board
Left pedal: Raise/Lower/Hold/Float
Right pedal: Attachment angle control–right/left

ATTACHMENT SYSTEM
Quick-connect A-mount on a hydraulically powered lift arm.
Quick connect PTO coupler and hydraulic connectors

CUTTING DECK SPECIFIC ACCESSORIES FOR 72” SIDE DISCHARGE DECK
Striping Kit
Leaf Mulching Kit
Medium Flow Blade (Standard)
High Flow Blade
Atomic Mulching Blade
Blade and Belt Kit

WARRANTY
2-year or 1500 hour factory warranty

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled diesel engine - 24.8 hp (18.5 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable
Weight - Approx. 1,862 kg

Warranty - 2-year limited warranty

ENGINE
3-cylinder
Liquid cooled
Brake hp rating - 28 hp at 2725 rpm


FUEL SYSTEM
Diesel fuel
43ltr fuel tank capacity
Replaceable fuel filter with water separator
Fuel gauge

ENGINE LUBRICATION
3.9 quart capacity
Spin on oil filter
Oil pressure warning light

ENGINE COOLING SYSTEM
Rear mounted, 8 fins/inch, 3 rows
Temperature gauge, indicator light, and over temp protection circuit
6.6 quart coolant capacity

HYDRAULIC COOLING SYSTEM
Double pass 6 row oil cooler
Tip out and removable for easy cleaning
13.2ltr coolant capacity

ELECTRICAL
12 volt electrical system
12 volt heavy duty battery
540 cold cranking amps
40 amp alternator
Console mounted key switch and controls

DRIVE SYSTEM
Two wheel drive: independent high-torque, low-speed wheel motors with 310cc displacement
Integrated transmission with two independent closed-loop hydrostatic circuits
One pump / motor controlling left side forward, neutral, and reverse
One pump / motor controlling right side forward, neutral, and reverse
Pumps are variable displacement piston type with slippers and full stroke capacity of 18cc/rev
Hydraulically actuated wet multi-disc clutch is part of integrated transmission
Transmission directly mounted to engine via bell housing
0-20.1kmh mow/transport speed, infinitely variable
0-13.6kmh reverse speed, infinitely variable

BRAKES
Service Brake: twin levers with dynamic braking through hydrostatic transmission
Parking Brake: Hand actuated brake lever located right of operator with two 10.25” diameter disc brakes mounted on the rear wheel motors

TIRES
High flotation turf tread tires
Front Caster – 4-ply ribbed tread, tubeless 15 x 6-6 20-22 psi
Drive – 24 x12-12 6-ply pneumatic tubeless, demountable and interchangeable Tread “Toro Tuff Trac”

FRAME
High strength steel frame components
Welded construction

CONTROLS
Adjustable twin steering sticks with high performance KYB hydraulic dampers
Rev/N/Forward, located on sides of operator
Right side control console featuring:
Key switch
Throttle
PTO engagement
Remote Hydraulics Selector Switch (optional)
Hydraulic deck lift with load holding check valves and gravity lower; located on right of operator
Parking Brake: Hand actuated brake lever
Rear Hydraulic Lift (optional): Raise/Hold/Lower/Float. Electric switch right side of operator

GAUGES
Hour meter
Fuel gauge

WARNING LIGHTS
High engine coolant temperature
Low engine oil pressure
Glow plug
Low battery voltage

OPERATOR SEAT
High back 2-piece cushion seat with drain hole
Deluxe low profile suspension
Adjustable for operator weight, seat back angle, seat fore/aft position, lumbar support and armrest height
Retractable seat belt
Built-in cup holder and personal storage reached from seat

SAFETY INTERLOCK SYSTEM
Tractor neutral
Operator presence (Engine shuts down if operator is not in seat and traction sticks are moved to the operation position.)
Parking brake
PTO on
Auxiliary hydraulics on
High temp (PTO shuts down but engine still running)
Over temp (engine shuts down)

GENERAL
ROPS: Two-post foldable, certified per OSHA 1928.52 specification.
Curb climbing: Capable of climbing 8” curbs
Tie Downs: Four loops, one located on each corner of the machine.

CUTTING DECKS

HEIGHT OF CUT:
1” - 6” adjustable in 1/4” increments
Change the HOC from 1 to 6 inches in ¼" increments. by raising the deck hydraulically and putting the pin in the corresponding easy-to-see HOC hole.

SIDE DISCHARGE DECK CONSTRUCTION:
7-gauge welded steel deck
5.5” deep
Grass discharged on the right side.
Patented 5/16” thick rubber discharge chute cover to limit the throw distance of clippings.
Width of Cut: 72”
Blade tip speed: 18,000 1,000 ft. /min.
Anti-scalp rollers around deck perimeter

GUARDIAN RECYCLER DECK CONSTRUCTION:
7-gauge welded steel deck
4.25” deep
Vertical discharge system equipped with special baffles which prevent throwing of objects out from the deck.
Width of Cut: 62” or 72”
Blade tip speed: 16,000 1,000 ft. /min
Anti-scalp rollers around deck perimeter

CUTTER DRIVE:
Splined PTO drives gearbox transferring power to three separate spindles via two separate belts.
All spindles have 1.25” diameter shafts mounted in 9” conical housing with dual greaseable tapered roller bearings.

BLADES:
Three, 1/4” thick, 2.5” wide, heat-treated steel blades.

DECK SUSPENSION:
Rigid front frame which supports deck via 4 vertically suspended chains.
Front drag links provide Fore/aft and left/right stability.
Weight transfer system consisting of two torsion springs counterbalances some cutting deck weight.

BELT IDLER:
Spring loaded (torsion) idler.

DECK SIDE SKID:
Replaceable, bolt-on, non-marking polymeric skid
On both sides for Guardian¨ Recycler deck
On left side on Side Discharge deck

ANTI-SCALP CUPS: One located on each blade spindle

MACHINE DIMENSIONS
Height, ROPS up – 72 in.
Overall length – 72 in.
Overall width – 78” (72” Guardian Recycler)
68” (62” Guardian Recycler)
75” (72” Side Discharge)

POLAR TRAC SYSTEM

GENERAL:
POLAR TRAC system converts the Groundsmaster 7200 into a snow removal machine complete with two rubber tracks and a climate control cab in less than four hours by two people.

TRACTION DRIVE
Three wheels per side with rear wheel mounted in place of mower traction wheel.
Front two wheels are mounted to a walking axle that permits motion without losing track tension.
Track tread is made of Kevlar reinforced rubber compound 0-8 mph mow/transport speed, infinitely variable

HYDRAULIC LIFT
Two foot pedals located on center of Polar Trac floor board
Left pedal: Raise/Lower/Hold/Float
Right pedal: Attachment angle control–right/left

ATTACHMENT SYSTEM
Quick-connect A-mount on a hydraulically powered lift arm.
Quick connect PTO coupler and hydraulic connectors

CUTTING DECK SPECIFIC ACCESSORIES FOR 72” SIDE DISCHARGE DECK
Striping Kit
Leaf Mulching Kit
Medium Flow Blade (Standard)
High Flow Blade
Atomic Mulching Blade
Blade and Belt Kit

WARRANTY
2-year or 1500 hour factory warranty

The Groundsmaster 7210 is a zero turn rotary mower rugged enough to be called a Groundsmaster. Powerful Kubota 35 hp (26 kw), 3-cylinder, liquid-cooled turbo diesel engines get the job done well. Durable heavy-duty 7-gauge welded deck construction and the industry's toughest spindle assembly provide long life. Use the Groundsmaster 7210 for more than mowing with the added versatility for removing snow, grooming infields and blowing leaves.

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled turbo diesel engine - 35 hp (26 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable

Weight - Approx. 862 kg

Warranty - 2-year limited warranty

The Groundsmaster 7210 is a zero turn rotary mower rugged enough to be called a Groundsmaster. Powerful Kubota 35 hp (26 kw), 3-cylinder, liquid-cooled turbo diesel engines get the job done well. Durable heavy-duty 7-gauge welded deck construction and the industry's toughest spindle assembly provide long life. Use the Groundsmaster 7210 for more than mowing with the added versatility for removing snow, grooming infields and blowing leaves.

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled turbo diesel engine - 35 hp (26 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable

Weight - Approx. 862 kg

Warranty - 2-year limited warranty

The Groundsmaster 7210 is a zero turn rotary mower rugged enough to be called a Groundsmaster. Powerful Kubota 35 hp (26 kw), 3-cylinder, liquid-cooled turbo diesel engines get the job done well. Durable heavy-duty 7-gauge welded deck construction and the industry's toughest spindle assembly provide long life. Use the Groundsmaster 7210 for more than mowing with the added versatility for removing snow, grooming infields and blowing leaves.

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled turbo diesel engine - 35 hp (26 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable

Weight - Approx. 862 kg

Warranty - 2-year limited warranty

The Groundsmaster 7210 is a zero turn rotary mower rugged enough to be called a Groundsmaster. Powerful Kubota 35 hp (26 kw), 3-cylinder, liquid-cooled turbo diesel engines get the job done well. Durable heavy-duty 7-gauge welded deck construction and the industry's toughest spindle assembly provide long life. Use the Groundsmaster 7210 for more than mowing with the added versatility for removing snow, grooming infields and blowing leaves.

Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9 inch (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. Combine that with the high-efficiency, tapered roller bearings that offer greater durability than spindles that use ball bearings. The result is greater stability and strength, providing longer deck and spindle life.

Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, 33% thicker and 75% stronger than ordinary 10 gauge commercial steel used in 7/10 decks.

Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.

Rubber Discharge Deflector
The discharge deflector on the 72" (183 cm) side discharge and 60" (152 cm) side discharge decks is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.

Quick Attach System (QAS)
With the QAS, anyone can switch from one attachment to another in less than a minute, with no tools required! Quickly get your fields back into playing condition. Accessories include: Debris Blower, Finish Grader, Tooth Rake, Drag Mat Carrier System, Cocoa Drag Mat, Steel Drag Mat, and Grooming Broom.

Manoeuvrability
Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.

Operator Comfort
The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.

Engine - Kubota liquid-cooled turbo diesel engine - 35 hp (26 kW)

Fuel Capacity - 43.5 liters, diesel

Ground Speed - Forward 0-20 km/h, variable. Reverse 0-13.7 km/h, variable

Weight - Approx. 862 kg

Warranty - 2-year limited warranty