Fusion Blade Low Lift, F23.86"-l-f-cw 72" & 104" Cut Side & Rear Discharge
Features
| Description: | Genuine BigDog & HUSTLER 72" & 104" Cut, Side and Rear Discharge Low Lift Fusion |
|---|
| Bar Blade |
|---|
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
|---|
| blade on selected *Super 104 models (*on the right hand side deck only). Fitted as |
|---|
| a service replacement blade on other models listed below where a low lift blade is |
|---|
| required. Blade Lift refers to the ability of a blade to provide vacuum to lift |
|---|
| grass so that it can be cut uniformly. More blade lift also contributes to removing |
|---|
| debris out of the grass, clearing debris out of the deck and throwing the grass |
|---|
| further in side discharge mode. In some conditions, more blade lift can result in |
|---|
| causing debris to build up under the deck, while in other conditions, the opposite |
|---|
| is true. Blade "Lift" can be measured from the bottom side of the blade to the |
|---|
| highest point of the blade sail. A Low Lift Blade (L) is adequate for shallow decks |
|---|
| and most consumer applications and can be used to reduce blowout or deck packing in |
|---|
| some conditions. Blade lift for this blade measures 0.79" (20.066 mm). Fusion |
|---|
| blades feature an exclusive electro-fusion technology that creates an ultra-hard |
|---|
| layer at the blade’s cutting edge, the blade remains sharp and continues to give |
|---|
| a clean cut far longer than any blade on the market. |
|---|
| Replaces OEM: | BigDog 796839 |
|---|
| HUSTLER 796839 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 72" & 104" cut |
|---|
| Deck (mm) | 1829 mm & 2641.6 mm |
|---|
| Deck (cm) | 182.9 cm & 264.15 cm |
|---|
| Length: (in): | 23.86" |
|---|
| Length: (mm): | 606 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 72" (1829 mm) cut BigDog Diablo MP (models BDU933275EX, BDU935106EX, BDU936443EX) |
|---|
| side discharge zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | 3 |
|---|
| Fits: | 72" (1829 mm) cut HUSTLER 3700 (*HU928713EX) rear discharge zero turn radius (ZTR) |
|---|
| models. |
|---|
| Qty required per unit: | *Use HP7696839 x 2 qty and HP796508 x 1 qty. |
|---|
| Fits: | 104" (2641.6 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX and |
|---|
| HU940544EX *on the right hand side deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| models HU931733EX and HU938910EX use with - for left hand side deck use HP796508 x |
|---|
| 1 qty, for right hand side deck use HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, clockwise rotation (flute/sail height 0.79"/ 20.066 |
|---|
| mm). Fusion blades feature an exclusive electro-fusion technology that creates an |
|---|
| ultra-hard layer at the blade’s cutting edge, the blade remains sharp and |
|---|
| continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | BigDog, HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
Buy Now, Pay Later
