| Description: | Genuine HUSTLER 60" & 104" Cut, Rear Discharge Low Lift Fusion Bar Blade |
|---|
| Editorial: | Genuine Hustler and BigDog low lift Fusion bar blade. Fitted as a production line |
|---|
| blade on 60" cut rear-discharge HUSTLER Super Z, HD and on the Super 104 (on the |
|---|
| centre deck, left hand side). Fitted as a service replacement blade on many other |
|---|
| models listed below where a low lift blade is required. Blade Lift refers to the |
|---|
| ability of a blade to provide vacuum to lift grass so that it can be cut uniformly. |
|---|
| More blade lift also contributes to removing debris out of the grass, clearing |
|---|
| debris out of the deck and throwing the grass further in side discharge mode. In |
|---|
| some conditions, more blade lift can result in causing debris to build up under the |
|---|
| deck, while in other conditions, the opposite is true. Blade "Lift" can be measured |
|---|
| from the bottom side of the blade to the highest point of the blade sail. A Low |
|---|
| Lift Blade (L) is adequate for shallow decks and most consumer applications and can |
|---|
| be used to reduce blowout or deck packing in some conditions. Blade lift for this |
|---|
| blade measures 0.79" (20.066 mm). Fusion blades feature an exclusive electro-fusion |
|---|
| technology that creates an ultra-hard layer at the blade’s cutting edge, the |
|---|
| blade remains sharp and continues to give a clean cut far longer than any blade on |
|---|
| the market. |
|---|
| Replaces OEM: | HUSTLER 795633 |
|---|
| Centre Hole Dia. (inches) | 0.63" |
|---|
| Centre Hole Dia. (mm) | 16.002 mm |
|---|
| Deck (inches) | 60" & 104" cut |
|---|
| Deck (mm) | 1524 mm & 2642 mm |
|---|
| Deck (cm) | 152.4 cm & 264.2 cm |
|---|
| Length: (in): | 20.50" |
|---|
| Length: (mm): | 520.7 mm |
|---|
| Thickness: (inches) | 0.203" |
|---|
| Thickness: (mm) | 5.156 mm |
|---|
| Width: (inches) | 2 1/2" |
|---|
| Width: (mm) | 63.5 mm |
|---|
| Height: (inches) | Flute/sail height 0.79" |
|---|
| Height: (mm) | Flute/sail height 20.066 mm |
|---|
| Centre Hole Type: | Round |
|---|
| Fits: | 60" (1524 mm) cut HUSTLER Super Z (models HU930024EX, HU932178EX, HU935320EX, |
|---|
| HU938126EX and HU941195EX), Super Z HD (model HU941336EX), Super Z Hyperdrive |
|---|
| (model HU937078EX) and Z Diezel (models HU931212EX and HU938191EX) rear discharge |
|---|
| zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | For 60" cut rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty. |
|---|
| Fits: | 104" (2642 mm) cut HUSTLER Super 104 (models HU931733EX, HU938910EX, HU939603EX and |
|---|
| HU940544EX *on the centre rear discharge deck only) zero turn radius (ZTR) models. |
|---|
| Qty required per unit: | *For the centre rear discharge decks use HP600901 x 2 qty and HP795633 x 1 qty (For |
|---|
| model HU939603EX use with - for left hand side deck use HP606392 x 1 qty, for right |
|---|
| hand side deck use HP606393 x 1 qty and for models HU931733EX and HU938910EX use |
|---|
| with - for left hand side deck use HP796508 x 1 qty, for right hand side deck use |
|---|
| HP796839 x 1 qty). |
|---|
| Features: | Low lift, flat Fusion blade, counter clockwise rotation (flute/sail height 0.79"/ |
|---|
| 20.066 mm). Fusion blades feature an exclusive electro-fusion technology that |
|---|
| creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp |
|---|
| and continues to give a clean cut far longer than any blade on the market. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Note: | Please call our friendly sales team if any assistance or further information is |
|---|
| required. |
|---|
| Please Note: | All blade bars are sold as singles, order the quantity required to make up a set. |
|---|
| Brand: | HUSTLER |
|---|
| Product Line: | Bar Blade, Blade Bar, Low Lift Bar Blade, |
|---|
Buy Now, Pay Later
