Electric Pto Clutch Assembly 1-1/8" Id X 4.875" Pulley
Features
| Product Line: | Clutch assembly - electric pto, electric pto clutch assembly, pto clutch assembly - electric, |
|---|
| Brand: | TORO Non-Genuine, Warner Non-Genuine, |
|---|
| GA Spares stocks electric clutches manufactured by an OEM supplier. |
|---|
| maintenance. Warranty covers faulty manufacture and/or workmanship. |
|---|
| accident, neglect, or improper clutch selection, installation, operation, or |
|---|
| normal use and does not cover damage or defect which results from alteration, |
|---|
| installing a new clutch. Failure to do so will void warranty. Warranty covers |
|---|
| therefore the responsibility of the servicing dealer to test these items prior to |
|---|
| correct equipment to test both the charging circuits and battery condition. It is |
|---|
| specialist component that should only be fitted by a servicing dealer with the |
|---|
| battery and/or charging circuits not providing the correct current to operate the |
|---|
| clutch adequately leading to premature failure. Electric PTO clutches are a |
|---|
| WHY? - The main causes of failures to electric clutches are due to faults with the |
|---|
| Over the counter sales of clutches as spare parts should be discouraged. |
|---|
| Standard Pack Quantity: | 1 |
|---|
| Please Note: | IMPORTANT INFORMATION ON ELECTRIC CLUTCHES |
|---|
| Integrated, water tight and impact resistant wiring harness. |
|---|
| Replaceable pulley bearing. |
|---|
| High temperature bearings. |
|---|
| Uses high torque cool coil technology. |
|---|
| Operates in a clockwise direction (when viewed from the pulley side of the clutch). |
|---|
| 175 ft. lbs. torque. |
|---|
| Suitable for use with two 1/2" ("A" or 68 series) belts. |
|---|
| 4.875" (123.825 mm) O.D Precision machined double pulley. |
|---|
| 1 1/8" (28.575 mm) I.D Hub. |
|---|
| Features: | Manufactured by an OEM supplier. |
|---|
| Pulley Diameter: (mm) | 123.825 mm |
|---|
| Fits: | Toro selected Z Master models including but not limited to Z320 (models 74191 and 74180 year 1998), Z325 (models 74182 and 74183 year 1998) and Z350 (model 74187 year 2000) zero turn radius (ZTR) ride-on models. |
|---|
| Pulley Diameter: (inches) | 4.875" |
|---|
| Inside Diameter: (mm) | 28.575 mm |
|---|
| Warner: 5218-33, |
|---|
| Inside Diameter: (inches) | 1 1/8" |
|---|
| Replaces OEM: | Toro: 94-4632, 105-1671, |
|---|
| Description: | Non-Genuine Toro, Warner Electric PTO Clutch Assembly |
|---|
Buy Now, Pay Later
