Blade Washer John Deere Suits Jas7532
Features
Description: | Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To |
---|
| Notes |
---|
Replaces OEM: | John Deere M149625 |
---|
Centre Hole Type: | Round 5/8" (15.875 mm) |
---|
Deck (cm) | 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut |
---|
Deck (inches) | 36", 38", 42" & 48" Cut |
---|
Deck (mm) | 915 mm, 965 mm, 1067 mm & 1220 mm Cut |
---|
Inside Diameter: (inches) | 5/8" |
---|
Inside Diameter: (mm) | 15.875 mm |
---|
Outside Diameter: (inches) | 1.748" |
---|
Outside Diameter: (mm) | 44.40 mm |
---|
Fits: | 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models |
---|
| - 2 required for 36" cut. |
---|
Fits: | 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" |
---|
| cut. |
---|
Fits: | 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, |
---|
| D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, |
---|
| X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and |
---|
| Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut. |
---|
Fits: | 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 |
---|
| ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - |
---|
| 3 required for 48" cut. |
---|
Features: | 5/8" (15.875 mm) hole. |
---|
Standard Pack Quantity: | 1 |
---|
Please Note: | Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, |
---|
| GY20962, GY21098) - This is the late model spindle housing |
---|
| with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on |
---|
| models with a serial number 015481 onwards. Note: Early models spindle assemblies |
---|
| (serial number 015480 and before) had a 12 mm thread. |
---|
Brand: | John Deere Non-Genuine, |
---|
Product Line: | Blade Mounting Washer, Washer - Blade Mounting, |
---|